Neil Pryde Wing Fly red/orange

Artikelnummer: 130040-000-2334
GTIN: Nicht zutreffend
Kategorie: Wing Foilen
Hersteller:

Mehr Informationen zu Neil Pryde Wing Fly

Video zum NP Fly Wing

Größe: 1,4 qm499,85 €

Dieser Artikel hat Variationen. Wählen Sie bitte die gewünschte Variation aus.

499,85 €

inkl. Mwst.* ,

Alter Preis: 769,00 €

Unverbindliche Preisempfehlung des Herstellers: 769,00 €

(Sie sparen 35%, also 269,15 €)

Sofort verfügbar
Lieferstatus: 2 - 3 Tage*

Persönliches Angebot anfordern!

Beschreibung

FLY

High lift, ultra efficient wing. Dramatically increased range and power, allowing you to use a far smaller wing than is typical in each set of conditions.

High Lift Concept
Modified Delta Planform
Dihedral Front Profile
Low Drag Wing Tips With Linear Washout
Vented Strut

HIGH LIFT CONCEPT

Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.

HIGH TENSION CANOPY WITH STRUCTURED CAMBER LENS

The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.

VENTED STRUT

The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equalize across the two sides of the wing. This improves overall performance and makes the wing

Design Driven

INNOVATION

Designed and tested at our NeilPryde Maui Design Center by Nils Rosenblad, former NeilPryde Windsurfing sail designer and America's Cup engineer, then further developed through our team's feedback from across the world. No stone is left uncovered in our relentless drive to be the best at what we do.

High Lift Coefficient Concept:

Modified delta Planform:

This creates a more efficient LE shape and an elliptical spanwise lift distribution for better upwind performance and control.

Dihedral Front Profile:

The dihedral angle allows higher aspect ratios due to increased wingtip clearance. It also makes the wing very roll stable, especially when flagging.

Low Drag Wingtips with Linear Washout:

The small LE diameter at the wingtips reduces drag and allows dynamic twist. This improves low end acceleration during pumping as well as control when powered up.

Vented Strut:

NeilPryde Wings Features and Innovations

High Tension Canopy with Structured Camber Lens

The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the Leading Edge Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.

Transverse Canopy Paneling

This construction matches the threadlines of the canopy panels to the load path, making the flying shape more stable and adding long-term durability to the canopy

Integral Batten System

Sewn-in composite battens create a flat, fast trailing edge with minimum flutter.

Staggered material weights on LE

The use of an ultra-light, high-tenacity woven polyester at the wingtips and back of strut results in a very light ‘feel’ due to reduced swing weight.

Boundary panels on Canopy Perimeter

The canopy structure is reinforced with a tough high tenacity rip stop frame that runs down the middle, out the trailing edges to the wingtips and then follows the LE tube back to the center for maximum strength and durability.

Rider Weight	40-60kg	60-85kg	85-100kg +
30-40+ kts	1.4m	1.8 -2.2m	2.5 - 2.9m
25-35 kts	1.4 - 1.8m	1.8 - 2.5m	2.9 - 3.6m
20-30 kts	1.8 - 2.2m	2.5 - 3.3m	3.6 - 4.3m
16-25 kts	2.2 - 2.9m	3.3 - 4.0m	4.3 - 5.0m
12-20 kts	2.9 - 3.6m	4.0 - 4.7m	5.0 - 6.0m
8-15 kts	3.6 - 4.3m	4.7 - 5.7m	6.0m*